NOTE: Each android device is slightly different, but the process is similar for connecting your Android device to the Wi-Fi network.
**New as of 6/28/2023**
- Open your device's Settings app.
- Navigate to Network & Internet > Internet.
- Select urwin from the list of available networks.
- Put in NetID and password.
- Enter the following settings for urwin:
CA Certificate |
Don't Validate |
Domain (not required on most Android phones) |
richmond.edu |
**Some Android versions (ex: Google Pixel) will have different settings:
- Open your device's Settings app.
- Tap Network & internet Internet.
- Turn Wi-Fi on.
- Tap a listed network. If it needs a password, you'll see the Lock . After you connect:
- "Connected" shows under the network name.
- The network is "Saved." When your device is near and Wi-Fi is on, your device automatically connects.
----------------------------------------------------------------
Old version:
- Navigate to Settings > Wi-Fi
- Select urwin from the list of available networks.
- Enter the following settings for urwin:
EAP Method |
PEAP |
CA Certificate |
Don't Validate |
Domain (not required on most Android phones) |
richmond.edu |
Identity |
your NetID |
Password |
your Network Password |
Phase 2 Authentication (may be under Advanced Settings) |
MSCHAPV2 |
Your device should now be connected to the urwin wireless network.
If you are unable to successfully connect to urwin using the settings above, please try to Forget the urwin network and then join again using the settings above.